Press the 5 3 or 2 4 button to adjust the hour and then press the MEMORY/SET (MEMORY/DIMMER) button.
/
Press the 5 3 or 2 4 button once to advance the time by 1 hour. Hold it down to advance continuously.
6
Press the 5 3 or 2 4 button to adjust the minutes and then press the MEMORY/SET (MEMORY/DIMMER) button.
In this example, the clock is set for the 24-hour (0:00) display.
1 2 3
Press the ON/STAND-BY button to turn the power on. Press the CLOCK/TIMER button. Within 10 seconds, press the 5 3 or 2 4 button to select �CLOCK�, and press the MEMORY/SET (MEMORY/ DIMMER) button.
Press the 5 3 or 2 4 button once to advance the time by 1 minute. Hold it down to change the time in 5-minutes intervals.
To confirm the time display:
[When the unit is in the stand-by mode] Press the CLOCK/TIMER button. The time display will appear for about 10 seconds.
Note:
4
Press the 5 3 or 2 4 button to select 24-hour or 12hour display and then press the MEMORY/SET (MEMORY/ DIMMER button.
The �CLOCK� will appear or time will flash to confirm the time display when the AC power supply is restored after a power failure or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform �Setting the clock� from step 1. If the �CLOCK� does not appear in step 3, step 4 (for selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
�0:00�
� The 24-hour display will appear. (0:00 - 23:59)
1 2
�AM 12:00� � The 12-hour display will appear. (AM 12:00 - PM 11:59) �AM 0:00� � The 12-hour display will appear. (AM 0:00 - PM 11:59)
Clear all the programmed contents. [Refer to �Clearing all the memory (reset)� on page 68 for details.] Perform �Setting the clock� from step 1.
Note:
The clock can also be set with the remote control.
18
XL-MP110DVD(EN)17-18 18 4/28/05, 8:38 AM
Basic Operation
[When the power is on] Press the CLOCK/TIMER button. Within 10 seconds, press the 5 3 or 2 4 button to display the time. The time display will appear for about 10 seconds.
